Ga door naar hoofdinhoud

iPhone 12 mini Akku tauschen

Stap 4
iPhone 12 mini Battery Replacement: stap 0, afbeelding 1 van 3 iPhone 12 mini Battery Replacement: stap 0, afbeelding 2 van 3 iPhone 12 mini Battery Replacement: stap 0, afbeelding 3 van 3
  • Grab the pull tab with your fingers and slowly pull it away from the battery, toward the bottom of the iPhone.

  • Repeat the previous procedure on the two remaining pull tabs.

  • If the adhesive breaks off underneath the battery and can't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).

  • Wait about one minute for the alcohol solution to weaken the adhesive.

  • Use the flat end of a spudger to gently lift the battery.

  • Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.

Fasse die Zuglasche mit den Fingern und ziehe sie langsam vom Akku weg zur Unterkante des iPhones.

Wiederhole das vorige Verfahren für die beiden restlichen Zuglaschen.

Wenn der Streifen unter dem Akku reißt und nicht wieder herausgeholt werden kann, dann gib einige Tropfen hochkenzentrierten Isopropylalkohol (mindestens 90%ig) unter die Kanten des Akkus in der Nähe der gerissenen Streifen.

Lasse den Alkohol ungefähr eine Minute lang einwirken.

Hebe den Akku behutsam mit dem flachen Ende eines Spudgers an.

Heble den Akku nicht mit Gewalt heraus. Wenn es nötig ist, kannst du noch etwas mehr Alkohol dazu geben, damit der Kleber noch mehr aufgeweicht wird. Verbiege den Akku nicht mit dem Herbelwerkzeug und stich ihn nicht an.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.