Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 11 handleidingen die deze stap bevatten.

Stap 8
Insert another opening pick into the left edge of the phone at an angle where a gap has already formed to prevent damage to the OLED panel. Slide the pick around the top edge of the phone to cut the adhesive. If the screen feels hard to slice, heat the top edge for one minute and try again.
  • Insert another opening pick into the left edge of the phone at an angle where a gap has already formed to prevent damage to the OLED panel.

  • Slide the pick around the top edge of the phone to cut the adhesive.

  • If the screen feels hard to slice, heat the top edge for one minute and try again.

Inserisci un altro plettro in un angolo sul lato sinistro del telefono, dove si sarà formata un'altra fessura, in modo da evitare di danneggiare il pannello OLED.

Fai scorrere il plettro lungo il lato superiore del telefono per rimuovere l’adesivo.

Se lo schermo risulta difficile da separare, riscalda il lato superiore per un minuto e riprova.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.