Ga door naar hoofdinhoud

AirPods Maxの分解

Stap 8
AirPods Max Teardown: stap 0, afbeelding 1 van 3 AirPods Max Teardown: stap 0, afbeelding 2 van 3 AirPods Max Teardown: stap 0, afbeelding 3 van 3
  • Ear cup grilles away! Each one has a single microphone stowaway, here to hear what the wearer is listening to, probably to then report back to the H1 chip for EQ adjustments. Or go directly to Tim Cook's earpiece.

  • Each 40 mm driver is held down by a few screws, one of them a gigantic standoff. We're momentarily stumped, and reach for our kitted-out Mahi driver kit. A torq-set #6 bit is ... not a perfect fit, but gets the job done.

イヤーカップのグリルが外れました!各グリルにマイクロフォンが1つずつ付いています。ここから耳に届くサウンドが流れて、EQ調節のためにH1チップに情報が伝送されるのでしょう。もしくは、Tim Cookのイヤフォンに直接繋がるかもしれません。

各40mmドライバーは数本のネジで固定されています。このうち1本は、非常に固く締められたスタンドオフネジです。一瞬ドキッとしますが、Mahiドライバーキットを取り出して、トルクセットの#6ビットを使えば…完全にフィットしなくても、なんとかネジは外れます。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.