Ga door naar hoofdinhoud
Engels
Nederlands

Stap 19 vertalen

Stap 19
Tamper Assembly Removed - Bottom You can see some growth (mold?!) on the bottom of the tamper in these photo and a little elsewhere. I think this is because if I don't empty out the grounds often enough and have a little mold growth there.
  • Tamper Assembly Removed - Bottom

  • You can see some growth (mold?!) on the bottom of the tamper in these photo and a little elsewhere.

  • I think this is because if I don't empty out the grounds often enough and have a little mold growth there.

  • I would love to solve this mold growth problem but can't think of an easy solution? (UV light?,) I tried leaving a small amount of a dilute bleach solution in the ground collector but that stank and did not work. White vinegar, perhaps..? So now I just try to empty the grounds and rinse at least once a day.

  • So that is it...!? This is as far as I have disassembled, fixed and cleaned this beloved family member. I will try to read comments and improve it and add to it if I do more. Hopefully you found this useful - thanks for reading it!

  • If you want to disassemble more follow this guide.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.