Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 3
This position on the logic board has three closely-spaced connectors for the power button, ambient temp sensor, and the CPU fan. Unplug them. Disconnect these three connectors for the HD temp sensor, optical drive temp sensor, and hard drive fan. Each one of these three connectors has a different number of pins so you can't mix them up when reconnecting. Thanks, Apple!
  • This position on the logic board has three closely-spaced connectors for the power button, ambient temp sensor, and the CPU fan. Unplug them.

  • Disconnect these three connectors for the HD temp sensor, optical drive temp sensor, and hard drive fan.

  • Each one of these three connectors has a different number of pins so you can't mix them up when reconnecting. Thanks, Apple!

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.