Ga door naar hoofdinhoud
Engels
Nederlands
Stap 13
Use a Phillips screwdriver to remove the 8.5 mm-long screw securing the controller board to the hard drive. Slide the controller board straight off the end of the hard drive to remove it. There will be a bit of resistance when removing this board, since it's connected to the hard drive's SATA and power connectors.
Remove the controller board
  • Use a Phillips screwdriver to remove the 8.5 mm-long screw securing the controller board to the hard drive.

  • Slide the controller board straight off the end of the hard drive to remove it.

  • There will be a bit of resistance when removing this board, since it's connected to the hard drive's SATA and power connectors.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.