Stap 2 vertalen
Stap 2
Loosen the battery adhesive
-
Apply 1-2 drops of high concentration (90% or greater) isopropyl alcohol underneath the battery at the tear-shaped indents near the corners of the battery well.
-
Wait about two minutes for the isopropyl alcohol to penetrate and weaken the battery adhesive before you proceed to the next step.
[title] Loosen the battery adhesive | |
- | [* red] Apply a few drops of high concentration (90% or greater) isopropyl alcohol underneath the battery at the tear-shaped indents near the corners of the battery well. |
+ | [* red] Apply 1-2 drops of high concentration (90% or greater) isopropyl alcohol underneath the battery at the tear-shaped indents near the corners of the battery well. |
+ | [* icon_caution] Using too much alcohol can damage the display. |
[* black] Wait about two minutes for the isopropyl alcohol to penetrate and weaken the battery adhesive before you proceed to the next step. |
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.