Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 15 handleidingen die deze stap bevatten.

Stap 3
Slide the pick back and forth along the bottom edge to slice through the adhesive. Do not attempt to cut the adhesive near the corners of the phone where the glass is curved or you risk cracking the glass panel. Leave your opening pick in the seam to prevent the adhesive from resealing.
  • Slide the pick back and forth along the bottom edge to slice through the adhesive.

  • Do not attempt to cut the adhesive near the corners of the phone where the glass is curved or you risk cracking the glass panel.

  • Leave your opening pick in the seam to prevent the adhesive from resealing.

沿着底部边缘来回滑动拨片以切穿粘合剂。

请勿尝试在玻璃弯曲的手机角落附近切掉胶粘剂,否则可能会破裂玻璃面板。

将三角撬片留在接缝中,以防止粘合剂重新密封。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.