Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 15 handleidingen die deze stap bevatten.

Stap 3
Slide the pick back and forth along the bottom edge to slice through the adhesive. Do not attempt to cut the adhesive near the corners of the phone where the glass is curved or you risk cracking the glass panel. Leave your opening pick in the seam to prevent the adhesive from resealing.
  • Slide the pick back and forth along the bottom edge to slice through the adhesive.

  • Do not attempt to cut the adhesive near the corners of the phone where the glass is curved or you risk cracking the glass panel.

  • Leave your opening pick in the seam to prevent the adhesive from resealing.

Fai scivolare il plettro avanti e indietro sul lato inferiore per farti strada attraverso l'adesivo.

Non provare a tagliare l'adesivo sugli angoli del telefono dove il vetro è curvo o rischi di rompere il pannello di vetro.

Lascia il plettro nell'apertura per prevenire l'adesivo dal riattaccarsi.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.