Ga door naar hoofdinhoud
Engels
Nederlands
Stap 6
Carefully peel back the copper foil covering the video connector until you can unmate it. Try not to tear the foil. On reassembly, make sure the video connector is properly mated before pressing down the copper foil. You should feel a definite click as it mates. Ensure that both ends are mated.
Disconnecting the video ribbon
  • Carefully peel back the copper foil covering the video connector until you can unmate it. Try not to tear the foil.

  • On reassembly, make sure the video connector is properly mated before pressing down the copper foil. You should feel a definite click as it mates. Ensure that both ends are mated.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.