Ga door naar hoofdinhoud
Engels
Nederlands

Stap 1 vertalen

Stap 1
Ensure that the lens cover is fully closed. Using the iFixit Jimmy (or similar tool), pry off the front bezel, starting at the opposite end to the lens.
Front and rear bezel removal
  • Ensure that the lens cover is fully closed.

  • Using the iFixit Jimmy (or similar tool), pry off the front bezel, starting at the opposite end to the lens.

  • Turn the projector over and remove the rear bezel in thesame way. (You can start at either end.)

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.