Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
Use the tip of a spudger to lift the left side of the front sensor array and separate the adhesive the rest of the way. The front sensor array is still connected to a ribbon cable that is adhered to the phone. Do not try to remove the front sensor array yet or you will damage it.
  • Use the tip of a spudger to lift the left side of the front sensor array and separate the adhesive the rest of the way.

  • The front sensor array is still connected to a ribbon cable that is adhered to the phone. Do not try to remove the front sensor array yet or you will damage it.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.