Ga door naar hoofdinhoud
Stap 13
Use a T8 Torx driver to remove two 5.0 mm screws from each hinge (four screws total). Each hinge has a third screw, which you should leave in place for now.
Remove some of the hinge screws
  • Use a T8 Torx driver to remove two 5.0 mm screws from each hinge (four screws total).

  • Each hinge has a third screw, which you should leave in place for now.

Entferne zwei 5 mm Torx T8 Schrauben von jedem Scharnier (also insgesamt vier).

Jedes Scharnier verfügt über eine dritte Schraube, die im Moment noch an Ort und Stelle bleibt.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.