Ga door naar hoofdinhoud
Stap 11
Carefully remove the antenna assembly, while simultaneously feeding the antenna cable bundle out from underneath the heat sink. During reassembly, gently pinch the cable bundle together and guide it under the heat pipe into the correct position on the board. If needed, use your tools to help guide it through, but don't force it. During reassembly, gently pinch the cable bundle together and guide it under the heat pipe into the correct position on the board. If needed, use your tools to help guide it through, but don't force it.
  • Carefully remove the antenna assembly, while simultaneously feeding the antenna cable bundle out from underneath the heat sink.

  • During reassembly, gently pinch the cable bundle together and guide it under the heat pipe into the correct position on the board. If needed, use your tools to help guide it through, but don't force it.

アンテナアセンブリを慎重に取り出しながら、同時にアンテナケーブルバンドルをヒートシンクの下から解いて外します。

再組み立ての間、慎重にケーブルバンドルをまとめて摘み、ボード上のヒートパイプの下に正しい方向で配線します。必要に応じて、ツールを使って配線します。バンドルを引っ張らないでください。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.