Ga door naar hoofdinhoud
Stap 11
Carefully remove the antenna assembly, while simultaneously feeding the antenna cable bundle out from underneath the heat sink. During reassembly, gently pinch the cable bundle together and guide it under the heat pipe into the correct position on the board. If needed, use your tools to help guide it through, but don't force it. During reassembly, gently pinch the cable bundle together and guide it under the heat pipe into the correct position on the board. If needed, use your tools to help guide it through, but don't force it.
  • Carefully remove the antenna assembly, while simultaneously feeding the antenna cable bundle out from underneath the heat sink.

  • During reassembly, gently pinch the cable bundle together and guide it under the heat pipe into the correct position on the board. If needed, use your tools to help guide it through, but don't force it.

Rimuovi con attenzione il gruppo antenna mentre contemporaneamente fai passare il gruppo dei cavi di antenna da sotto il dissipatore di calore.

In fase di rimontaggio, metti insieme delicatamente il gruppo dei cavi e guidalo sotto il tubo di calore nella sua posizione corretta sulla scheda. Se necessario, usa i tuoi attrezzi per aiutarti a guidare i cavi lungo il passaggio, ma non forzarli mai.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.