Ga door naar hoofdinhoud
Stap 11
Carefully remove the antenna assembly, while simultaneously feeding the antenna cable bundle out from underneath the heat sink. During reassembly, gently pinch the cable bundle together and guide it under the heat pipe into the correct position on the board. If needed, use your tools to help guide it through, but don't force it. During reassembly, gently pinch the cable bundle together and guide it under the heat pipe into the correct position on the board. If needed, use your tools to help guide it through, but don't force it.
  • Carefully remove the antenna assembly, while simultaneously feeding the antenna cable bundle out from underneath the heat sink.

  • During reassembly, gently pinch the cable bundle together and guide it under the heat pipe into the correct position on the board. If needed, use your tools to help guide it through, but don't force it.

Entferne vorsichtig die Antenneneinheit und führe gleichzeitig das Antennenkabelbündel unter dem Kühlkörper heraus.

Fasse beim Zusammenbau das Kabelbündel behutsam zusammen und führe es unter dem Wärmerohr in die korrekte Lage auf der Platine. Wenn nötig, benutze Werkzeug zum Einfädeln, aber wende keine Kraft an.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.