Ga door naar hoofdinhoud
Stap 10
Use an opening pick to pry up the antenna assembly and separate it from the MacBook Pro. Watch out for the delicate ribbon cables in the middle section. Avoid sliding the pick from side to side so as not to damage the cables. Watch out for the delicate ribbon cables in the middle section. Avoid sliding the pick from side to side so as not to damage the cables.
  • Use an opening pick to pry up the antenna assembly and separate it from the MacBook Pro.

  • Watch out for the delicate ribbon cables in the middle section. Avoid sliding the pick from side to side so as not to damage the cables.

Heble die Antenneneinheit mit einem Plektrum hoch und trenne sie vom MacBook Pro ab.

Achte auf die empfindlichen Flachbandkabel in der Mitte. Vermeide es, das Plektrum von Seite zu Seite zu führen, damit die Kabel nicht beschädigt werden.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.