Ga door naar hoofdinhoud
Stap 8
Use a T5 Torx driver to remove the four 3.3 mm screws securing the display board. Before reinstalling these screws: Make sure the display board flex cable lies on top of the board, not trapped underneath.
Disconnect the display board
  • Use a T5 Torx driver to remove the four 3.3 mm screws securing the display board.

  • Before reinstalling these screws:

  • Make sure the display board flex cable lies on top of the board, not trapped underneath.

使用T5梅花槽螺丝刀卸下固定显示屏板的四颗3.3毫米螺丝。

在重新安装这些螺丝之前:

确保显示板的柔性电缆位于板的顶部,而不是被困在下面。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.