Ga door naar hoofdinhoud
Stap 4
Use a T3 Torx driver to remove the four 2.0 mm screws from the hinge covers (two screws on each side). Use a T3 Torx driver to remove the four 2.0 mm screws from the hinge covers (two screws on each side).
Remove the hinge covers
  • Use a T3 Torx driver to remove the four 2.0 mm screws from the hinge covers (two screws on each side).

Drehe die vier 2,0 mm Torx T3 Schrauben aus den Scharnierabdeckungen heraus (also zwei auf jeder Seite).

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.