Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
There are 6 screw to remove, that hold the touchpad and circuit board onto the dishwasher door.   A Torx-15 tool removes them.  They are the top 6 screws.
Open the door and remove the Torx Screws
  • There are 6 screw to remove, that hold the touchpad and circuit board onto the dishwasher door. A Torx-15 tool removes them. They are the top 6 screws.

  • I've circled 4 of them in Red here. There are 2 more on the left that match the position of the 2 on the right.

  • There are more identical screws lower on the door, closer to the floor, but don't remove them.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.