Ga door naar hoofdinhoud

MacBook Air 13" Retina-scherm 2019 Vervanging van de onderste behuizing

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 27 handleidingen die deze stap bevatten.

Engels
Nederlands

Stap 2 vertalen

Stap 2
MacBook Air 13" Retina Display 2019 Lower Case Replacement, Remove the lower case: stap 0, afbeelding 1 van 1
Remove the lower case
  • Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.

  • Remove the lower case.

  • After reassembly, your MacBook might not turn on until it's connected to a power source (a low power phone charger may work). To test your repair, plug in your charger, allow two minutes for your MacBook to turn on, and check that everything works as expected.

Duw je vingers tussen het scherm en de onderste behuizing en trek deze omhoog om de onderste behuizing van de MacBook Air los te maken.

Verwijder de onderste behuizing.

[title] Remove the lower case
[* black] Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.
[* black] Remove the lower case.
+[* icon_reminder] After reassembly, your MacBook might not turn on until it's connected to a power source (a low power phone charger may work). To test your repair, plug in your charger, allow two minutes for your MacBook to turn on, and check that everything works as expected.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.