Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 42
The logic board assembly is a tight fit, but you can make it easier to remove by inserting a spudger under the left edge and levering it up slightly. There should be no resistance as you remove the logic board. Check all cables carefully and hold them out of the way if needed so they don't snag on the board.
  • The logic board assembly is a tight fit, but you can make it easier to remove by inserting a spudger under the left edge and levering it up slightly.

  • There should be no resistance as you remove the logic board. Check all cables carefully and hold them out of the way if needed so they don't snag on the board.

Il gruppo della scheda logica è inserito con giochi ridotti, ma poi rendere più facile la rimozione inserendo uno spudger sotto il bordo sinistro e facendo leva dolcemente.

Non si dovrebbe incontrare resistenza nel rimuovere la scheda logica. Controlla con cura i vari cavi staccati e tieni lontani in modo che non possono impigliarsi alla scheda stessa.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.