Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 31
Open the locking flap on the right fan's ZIF connector by prying it straight up from the logic board. Disconnect the right fan by pulling its cable away from the logic board until it releases from its socket. If possible, pull on the tape attached to the cable, rather than the cable itself, to reduce the risk of damage.
  • Open the locking flap on the right fan's ZIF connector by prying it straight up from the logic board.

  • Disconnect the right fan by pulling its cable away from the logic board until it releases from its socket.

  • If possible, pull on the tape attached to the cable, rather than the cable itself, to reduce the risk of damage.

Disconnetti il connettore ZIF della ventola destra facendo leva sotto di esso per sollevarlo dalla scheda logica.

Disconnetti l'altoparlante destro tirando il suo cavo fuori dalla scheda logica finché il flex non esce dal suo zoccolo.

Se possibile, tira sul nastro attaccato al cavo invece che sul cavo stesso per ridurre il rischio di danneggiamento.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.