Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 29
Disconnect the keyboard backlight by pulling its cable away from the logic board until it releases from its socket. If possible, pull on the tape attached to the cable, rather than the cable itself, to reduce the risk of damage. Move the cable away from its connector so it can more easily clear the logic board during removal.
  • Disconnect the keyboard backlight by pulling its cable away from the logic board until it releases from its socket.

  • If possible, pull on the tape attached to the cable, rather than the cable itself, to reduce the risk of damage.

  • Move the cable away from its connector so it can more easily clear the logic board during removal.

Desconecta la retroiluminación del teclado tirando de su cable lejos de la placa lógica hasta que se suelte de su zócalo.

Si es posible, tira de la cinta adjunta al cable, en lugar del propio cable, para reducir el riesgo de daños.

Aleja el cable de su conector para que pueda despejar más fácilmente la placa lógica durante la extracción.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.