Ga door naar hoofdinhoud

Procedimiento de apertura

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 2
Opening Procedure, Safety Requirements: stap 0, afbeelding 1 van 3 Opening Procedure, Safety Requirements: stap 0, afbeelding 2 van 3 Opening Procedure, Safety Requirements: stap 0, afbeelding 3 van 3
Safety Requirements
  • Because the gap between the screen and watch body is so thin, a sharp blade is needed to separate the two. Read the following warnings carefully before proceeding.

  • Protect your fingers by keeping them completely clear of the knife. If in doubt, protect your free hand with a heavy glove, such as a leather shop glove or gardening glove.

  • Be careful not to apply too much pressure, as this might cause the knife to slip and cut you, or damage the watch.

  • Wear eye protection. The knife or glass may break, sending pieces flying.

  • Attach or remove the watch band as needed to provide more control as you make repairs.

Debido a que el espacio entre la pantalla y el cuerpo del reloj es tan delgado, se necesita una cuchilla afilada para separar ambos. Lee las siguientes advertencias cuidadosamente antes de continuar.

Protege tus dedos manteniéndolos completamente alejados del cuchillo. En caso de duda, protege tu mano libre con un guante pesado, como un guante de cuero o un guante de jardinería.

Procura no aplicar demasiada presión, ya que esto podría hacer que el cuchillo resbale y te corte, o dañar el reloj.

Usa protección para los ojos. El cuchillo o el cristal pueden romperse, haciendo que los pedazos salgan volando.

Coloca o quita la correa del reloj según sea necesario para tener más control mientras haces las reparaciones.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.