Repareer je spullen Gemeenschap Winkel

Samsung Galaxy S20 Plus Vervanging van het scherm

Terug naar de handleiding
Engels
Nederlands
Stap 2
Samsung Galaxy S20 Plus Screen Replacement, Adhesive tip: stap 0, afbeelding 1 van 1
Adhesive tip

  • In the next several steps, you will heat and separate the black adhesive around the perimeter of the device.

  • The adhesive surrounding the long edges of the device is thin and will only require you to insert the pick 5 mm to separate.

  • Note that along the top edge of the phone, the adhesive runs significantly farther from the device's edge. You will need to insert your pick deeper here to fully seperate the adhesive.

Tip over de lijm

In de volgende stappen zul je de zwarte lijm rondom de buitenkant van het toestel moeten verwarmen en van het toestel moeten scheiden.

Let op dat de lijm, aan de bovenkant van de telefoon, zich verder van de rand van de telefoon bevindt dan op andere plekken. Het zal daarom dus nodig zijn dat je je plectrum iets dieper in het toestel steekt om de lijm volledig los te kunnen maken.

De lijm rondom de rest van het toestel is dunner en vereist dat je je plectrum slechts 5 mm in het toestel steekt.

[title] Adhesive tip
-[* red] In the next several steps, you will heat and separate the black adhesive around the perimeter of the device.
- [* orange] Note that along the top edge of the phone, the adhesive runs significantly farther from the device's edge. You will need to insert your pick deeper here to fully seperate the adhesive.
- [* icon_note] The adhesive surrounding the rest of the device is thinner and will only require inserting the pick ~5 mm to seperate.
+[* icon_note] In the next several steps, you will heat and separate the black adhesive around the perimeter of the device.
+[* red] The adhesive surrounding the long edges of the device is thin and will only require you to insert the pick 5 mm to separate.
+[* orange] Note that along the top edge of the phone, the adhesive runs significantly farther from the device's edge. You will need to insert your pick deeper here to fully seperate the adhesive.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.