Ga door naar hoofdinhoud

打开手表操作

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap 2
Opening Procedure, Safety Requirements: stap 0, afbeelding 1 van 3 Opening Procedure, Safety Requirements: stap 0, afbeelding 2 van 3 Opening Procedure, Safety Requirements: stap 0, afbeelding 3 van 3
Safety Requirements
  • Because the gap between the screen and watch body is so thin, a sharp blade is needed to separate the two. Read the following warnings carefully before proceeding.

  • Protect your fingers by keeping them completely clear of the knife. If in doubt, protect your free hand with a heavy glove, such as a leather shop glove or gardening glove.

  • Be careful not to apply too much pressure, as this might cause the knife to slip and cut you, or damage the watch.

  • Wear eye protection. The knife or glass may break, sending pieces flying.

  • Feel free to attach or remove the watch band as needed to provide more control as you make repairs.

由于屏幕和表体之间的间隙非常薄,因此需要使用锋利的刀片将两者分开。在继续之前,请仔细阅读以下警告。

保持手指完全远离小刀,以保护手指。如有疑问,请用沉重的手套(如皮革店手套或园艺手套)保护你的手。

注意不要施加太大的压力,因为这可能会导致刀打滑并割伤你或损坏手表。

戴护目镜。刀或玻璃可能会破裂,使碎片飞散。

如有需要,可以随意连接或卸下表带,以在维修时提供更多控制。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.