Ga door naar hoofdinhoud

Stap 1 vertalen

Stap 1
Lay laptop on it's face and remove the two #1 Phillips screws in the back of the black plastic panel with a raised center. The screws can not be removed from the panel, so loosen them until the panel can come off.
  • Lay laptop on it's face and remove the two #1 Phillips screws in the back of the black plastic panel with a raised center.

  • The screws can not be removed from the panel, so loosen them until the panel can come off.

  • Carefully lift the panel using the thumb slot on the side closest to you while the battery is pointed out.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.