Repareer je spullen Gemeenschap Winkel

Remplacement de l'ensemble barre d'antenne du MacBook Pro 13" deux ports Thunderbolt 2019

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Terug naar de handleiding
Engels
Frans
Vorige stap

Stap 12 vertalen

Stap 12
MacBook Pro 13" Two Thunderbolt Ports 2019 Antenna Bar Assembly Replacement: stap 0, afbeelding 1 van 1

  • Remove the antenna cable assembly.

  • During reassembly, gently pinch the cable bundle together and guide it under the frame into the correct position on the board. If needed, use your tools to help guide it through, but don't force it.

Ôtez l'ensemble antenne.

Lors du remontage, pincez délicatement le faisceau de câbles et faites-le passer sous le caloduc afin de le positionner correctement. Si nécessaire, aidez-vous de vos outils, mais ne forcez pas.

[* black] Remove the antenna cable assembly.
-[* icon_reminder] During reassembly, gently pinch the cable bundle together and guide it under the heat pipe into the correct position on the board. If needed, use your tools to help guide it through, but don't force it.
+[* icon_reminder] During reassembly, gently pinch the cable bundle together and guide it under the frame into the correct position on the board. If needed, use your tools to help guide it through, but don't force it.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.