Ga door naar hoofdinhoud

2018年款13寸 MacBook Pro 底壳更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 10 handleidingen die deze stap bevatten.

Stap 5
MacBook Pro 13" Touch Bar 2018 Lower Case Replacement: stap 0, afbeelding 1 van 3 MacBook Pro 13" Touch Bar 2018 Lower Case Replacement: stap 0, afbeelding 2 van 3 MacBook Pro 13" Touch Bar 2018 Lower Case Replacement: stap 0, afbeelding 3 van 3
  • Insert your opening pick once again under the front edge of the lower case, near one of the two centermost screw holes.

  • Give the pick a firm twist to pop free the third clip securing the lower case to the chassis.

  • Repeat this procedure near the other of the two centermost screw holes, popping the fourth clip free.

在两个最中心的螺丝孔之一附近,再次将三角撬片插入底壳体的前边缘下方。

用力敲一下三角撬片,以松开将下部盒固定到机箱的第三个夹子。

在两个最中心的螺丝孔中的另一个附近重复该步骤,以释放第四个夹子。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.