Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
Insert an opening pick underneath the corner of the microphone board and wiggle the pick from side to side while sliding it in further. Tilt the pick to pry up the board and separate the microphone adhesive. Tilt the pick to pry up the board and separate the microphone adhesive.
Release the microphone adhesive
  • Insert an opening pick underneath the corner of the microphone board and wiggle the pick from side to side while sliding it in further.

  • Tilt the pick to pry up the board and separate the microphone adhesive.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.