Ga door naar hoofdinhoud
Engels
Nederlands
Stap 4
If the phone's screen is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed. Once the screen is warm to the touch, apply a suction cup  to the bottom edge of the phone. Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the midframe. Start to cut the adhesive by sliding the opening pick to the bottom right corner.
  • If the phone's screen is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed.

  • Once the screen is warm to the touch, apply a suction cup to the bottom edge of the phone.

  • Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the midframe. Start to cut the adhesive by sliding the opening pick to the bottom right corner.

Als het scherm eenmaal te warm is om comfortabel aan te raken, druk je een zuignap om de onderkant van de telefoon.

Trek de zuignap naar boven en steek een openingsplectrum in de opening tussen het glazen scherm en het midframe. Begin met het doorsnijden van de lijm door je plectrum naar de rechter onderhoek te schuiven.

+[* icon_note] If the phone's screen is cracked, the suction handle may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction handle in place and allow it to cure so you can proceed.
[* black] Once the screen is warm to the touch, apply a suction cup to the bottom edge of the phone.
[* black] Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the midframe. Start to cut the adhesive by sliding the opening pick to the bottom right corner.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.