Skip to main content
Step 6
In this step, you will use the rotary tool to make a thin cut in the stripped screw that enables you to use a flathead screwdriver to remove the screw. We recommend using a low power setting (we used 2 out of 6) to prevent damaging the rest of the device or the screw.
  • In this step, you will use the rotary tool to make a thin cut in the stripped screw that enables you to use a flathead screwdriver to remove the screw.

  • We recommend using a low power setting (we used 2 out of 6) to prevent damaging the rest of the device or the screw.

  • You want the cut to be deep enough that you can fit a flathead screwdriver into it, but thin enough that the screwdriver has something to grip.

  • Make a single thin cut into the head of the stripped screw.

En este paso, utilizarás la herramienta giratoria para hacer un corte fino en el tornillo barrido para poder utilizar un destornillador de cabeza plana para quitar el tornillo.

Recomendamos utilizar un ajuste de baja potencia (utilizamos 2 de 6) para evitar dañar el resto del dispositivo o el tornillo.

El corte debe ser lo suficientemente profundo para que pueda caber un destornillador de cabeza plana en él, pero lo suficientemente delgado para que el destornillador tenga algo que agarrar.

Haz un solo corte fino en la cabeza del tornillo barrido.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.