Ga door naar hoofdinhoud

Stap 1 vertalen

Stap 1
Once you remove the ball bearing ring from the bottom half of the Nexus Q, you will be exposed to a diffuser (white ring) held in with three T6 Torx screws. Use a #0 Philips head screwdriver to remove the three 0.8 mm screws holding the diffuser in place.
  • Once you remove the ball bearing ring from the bottom half of the Nexus Q, you will be exposed to a diffuser (white ring) held in with three T6 Torx screws.

  • Use a #0 Philips head screwdriver to remove the three 0.8 mm screws holding the diffuser in place.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.