Ga door naar hoofdinhoud
Engels
Nederlands
Stap 2
Locate and remove the heat sink mounting screws using a #1 Phillips Screwdriver. These screws will be tight as they hold a critical component onto the processor. You may need to use a little extra elbow grease to remove them. These screws will be tight as they hold a critical component onto the processor. You may need to use a little extra elbow grease to remove them.
  • Locate and remove the heat sink mounting screws using a #1 Phillips Screwdriver.

  • These screws will be tight as they hold a critical component onto the processor. You may need to use a little extra elbow grease to remove them.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.