Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 8 vertalen

Stap 8
Thread the display flex cable through the gap in the midframe and remove the display. Not all replacement screens come with a new preinstalled fingerprint sensor. In case you need to transfer your old fingerprint sensor to your replacement screen you can follow this guide, to remove it. Before installing a new display, remove all traces of the old adhesive from the frame, and clean the glued areas with isopropyl alcohol (>90%) and a lint-free cloth.
  • Thread the display flex cable through the gap in the midframe and remove the display.

  • Not all replacement screens come with a new preinstalled fingerprint sensor. In case you need to transfer your old fingerprint sensor to your replacement screen you can follow this guide, to remove it.

  • Before installing a new display, remove all traces of the old adhesive from the frame, and clean the glued areas with isopropyl alcohol (>90%) and a lint-free cloth.

  • The best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place.

将显示屏柔性电缆穿过中框的间隙,然后卸下显示屏。

并非所有更换屏幕都配备了新的预装指纹传感器。如果你需要将旧的指纹传感器转移到替换屏幕上,则可以按照本指南进行操作以将其删除。

在安装新显示器之前,请从框架上清除所有旧粘合剂的痕迹,并用异丙醇(> 90%)和无绒布清洁粘合区域。

保护新屏幕的最佳方法是使用一张定制的双面胶带。将胶带粘贴到屏幕背面,然后小心地将显示屏电缆穿过框架。对准屏幕,然后将其按入到位。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.