Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 3
Once the screen is warm to the touch, apply a suction cup  to the bottom edge of the phone. Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the midframe. Start to cut the adhesive by sliding the opening pick to the bottom right corner. Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the midframe. Start to cut the adhesive by sliding the opening pick to the bottom right corner.
OLED Screen & Digitizer
  • Once the screen is warm to the touch, apply a suction cup to the bottom edge of the phone.

  • Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the midframe. Start to cut the adhesive by sliding the opening pick to the bottom right corner.

屏幕变热后,将吸盘套在手机的底部边缘。

向上拉起吸盘,然后在显示屏玻璃和中框之间的间隙中插入一个三角撬片。通过将三角撬片滑动到右下角开始切割粘合剂。

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.