Ga door naar hoofdinhoud

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 3
Once the screen is warm to the touch, apply a suction cup  to the bottom edge of the phone. Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the midframe. Start to cut the adhesive by sliding the opening pick to the bottom right corner. Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the midframe. Start to cut the adhesive by sliding the opening pick to the bottom right corner.
OLED Screen & Digitizer
  • Once the screen is warm to the touch, apply a suction cup to the bottom edge of the phone.

  • Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the midframe. Start to cut the adhesive by sliding the opening pick to the bottom right corner.

Una volta che lo schermo è caldo al tatto, fai aderire una ventosa al bordo inferiore del telefono.

Tira la ventosa verso l'alto ed infila un plettro nella fessura tra il vetro dello schermo e il telaio intermedio. Inizia a tagliare l'adesivo facendo scorrere il plettro verso l'angolo in basso a destra.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.