Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Engels
Nederlands
Stap 8
Using a metal spudger, push back on the four clips holding the LCD screen to the logic board. Next gradually pull the screen away from the board so that none of the clips are engaged. Last, use a metal spudger to push back on the clip locking in the ribbon cable for the screen.
  • Using a metal spudger, push back on the four clips holding the LCD screen to the logic board.

  • Next gradually pull the screen away from the board so that none of the clips are engaged.

  • Last, use a metal spudger to push back on the clip locking in the ribbon cable for the screen.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.