Ga door naar hoofdinhoud
Engels
Nederlands

Stap 1 vertalen

Stap 1
Orient the Surface so the side with the charging port is facing you. Use your finger to lift the tab and unplug the orange ribbon from the motherboard. Remove the two 3.6 mm T4 Torx screws that hold the charging port in place.
  • Orient the Surface so the side with the charging port is facing you.

  • Use your finger to lift the tab and unplug the orange ribbon from the motherboard.

  • Remove the two 3.6 mm T4 Torx screws that hold the charging port in place.

  • Remove the charging port by sliding it out from the main board.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.