Ga door naar hoofdinhoud
Engels
Nederlands
Stap 13
This is the pin you need! It's the LEFT leg of DA1 ! Put tape on the other IC's. Just to prevent bridges and just to be sure that you have the correct pin. Solder the red cable to the LEFT leg of DA1.
Solder the red cable
  • This is the pin you need! It's the LEFT leg of DA1 !

  • Put tape on the other IC's. Just to prevent bridges and just to be sure that you have the correct pin.

  • Solder the red cable to the LEFT leg of DA1.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.