Ga door naar hoofdinhoud

iBook G3 12" Top Shield Replacement

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 12 handleidingen die deze stap bevatten.

Engels
Nederlands
Stap 2
iBook G3 12" Top Shield Replacement: stap 0, afbeelding 1 van 1
  • Remove the following 14 screws (some models may be missing a couple of screws):

  • One 2.5 mm Phillips.

  • Six 3.5 mm Phillips.

  • One 4.5 mm Phillips near the sleep light with a small shaft.

  • Two 4.5 mm Phillips with larger shafts.

  • Four 5 mm Phillips

  • If a screw is inserted in the left hole, the 14.2 mm screw in step 24 can not be inserted to hold the top case down.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.