Repareer je spullen Gemeenschap Winkel

Mac Pro 2019 demontage

Terug naar de handleiding
Engels
Nederlands
Stap 7
Mac Pro 2019 Teardown: stap 0, afbeelding 1 van 3 Mac Pro 2019 Teardown: stap 0, afbeelding 2 van 3 Mac Pro 2019 Teardown: stap 0, afbeelding 3 van 3

  • The feet are held in place with just one screw each—although the screws themselves are buried deep in slots in the space frame pillars, making them a bit awkward to access. We make do with a 4 mm hex key and a Mako driver for extra leverage.

  • The screws are held captive inside the frame, so you won't lose those, but we can't say the same for these feet. Better keep an eye on these things so they don't run away.

  • We didn't shell out the $400 for the wheel-y upgrade, so it's nice to know that we don't really need to drag this thing to the Apple store to swap its shoes.

  • If you're feeling adventurous and want to attach your own feet or wheels, the screws are M5x0.8. Since we can't remove them, we're unsure of their exact length, but we estimate 15-20 mm. They extend out about 4-4.5 mm from the bottom of the aluminum slab.

De voeten van de computer worden elk op hun plek gehouden met slechts één schroef - hoewel de schroeven wel diep in de gleuven van het frame zitten, wat het wat lastig maakt om ze te bereiken. Ons lukt het met een 4 mm inbussleutel en een Mako-schroevendraaier voor een extra hefboom.

De schroeven worden stevig vastgehouden in het frame, dus die zul je niet kwijtraken. Maar over de voeten kunnen we niet hetzelfde zeggen, dus pas op dat ze niet van je weglopen.

We hebben geen $400 op tafel gelegd voor de wielenupgrade, maar het is fijn om te weten dat we niet per se naar een Apple store hoeven om de schoenen van deze unit om te laten wisselen.

[* black] The feet are held in place with just one screw each—although the screws themselves are buried deep in slots in the space frame pillars, making them a bit awkward to access. We make do with a 4 mm hex key and a Mako driver for extra leverage.
[* icon_note] The screws are held captive inside the frame, so you won't lose those, but we can't say the same for these feet. Better keep an eye on these things so they don't run away.
[* black] We didn't shell out the $400 for the [https://www.macrumors.com/2019/12/10/new-mac-pro-wheels-cost-400-dollars/|wheel-y upgrade|new_window=true], so it's nice to know that we don't ''really'' need to drag this thing to the Apple store to swap its shoes.
+[* icon_note] If you're feeling adventurous and want to attach your own feet or wheels, the screws are M5x0.8. Since we can't remove them, we're unsure of their exact length, but we estimate 15-20 mm. They extend out about 4-4.5 mm from the bottom of the aluminum slab.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.