Ga door naar hoofdinhoud
Engels
Nederlands
Stap 10
How can we let up when we’re so close? So let’s keep on. First, we put a new bezel into the protection pressure mold. Second, apply the bezel glue around the bracket once we fix the bracket. Third, fit the pasted LCD with the bracket. Here is a detail that should be cautioned, place the LCD from the side of flex cable position.
Bezel Attaching
  • How can we let up when we’re so close? So let’s keep on. First, we put a new bezel into the protection pressure mold.

  • Second, apply the bezel glue around the bracket once we fix the bracket.

  • Third, fit the pasted LCD with the bracket. Here is a detail that should be cautioned, place the LCD from the side of flex cable position.

  • Fourth, once done, press hard around the screen with our hand to make sure the LCD is completely inside the frame.

  • Fifth, cover the protection pressure mold and leave it for 30 mins.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.