Ga door naar hoofdinhoud
Engels
Nederlands
Stap 9
For this part, please make sure the flex cable is outside the LCD while you put the LCD on the mat. Then, we set the time and press “START” BUTTON. The vacuum time is 20s, the laminate time is 15s and the bubble removing time is 180s. Here, we should test the display and the touch of the screen.
LCD Laminating Part 3
  • For this part, please make sure the flex cable is outside the LCD while you put the LCD on the mat.

  • Then, we set the time and press “START” BUTTON. The vacuum time is 20s, the laminate time is 15s and the bubble removing time is 180s.

  • Here, we should test the display and the touch of the screen.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.