Ga door naar hoofdinhoud
Engels
Nederlands
Stap 6
For this step, paint a layer of 8333 glue remover on the OCA glue and wait for 30s. After that tearing off it with one hand. And be careful with force applied. This is to avoid damaging the OLED screen. Once finished the glue removing, it’s time to clean the screen with white oil. Here are also two tips we would like to mention. That is, be more careful of the touch’s golden circuit at the edge of the screen during the cleaning and slide the dustless cloth gently.
Glue Removing
  • For this step, paint a layer of 8333 glue remover on the OCA glue and wait for 30s.

  • After that tearing off it with one hand. And be careful with force applied. This is to avoid damaging the OLED screen.

  • Once finished the glue removing, it’s time to clean the screen with white oil. Here are also two tips we would like to mention. That is, be more careful of the touch’s golden circuit at the edge of the screen during the cleaning and slide the dustless cloth gently.

  • It’s because if too much force is applied, the touch cable would break and the touch is unworkable.

  • The other one is while cleaning the flex cables area, the action should be gentle and the white oil can’t be added too much.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.