Ga door naar hoofdinhoud
Engels
Nederlands
Stap 5
For this step, there are three tips we have to mention. First, the steel cutting wire should be inserted from the side of the flex cables. Second, you should pull the steel wire with even force. If the left side doesn’t work while you pull the wire, you can change other directions, like right or middle side of the screen. Third, if you encounter the residual glue while pulling the steel wire, you can scrape it and then move on.
Glass Separating
  • For this step, there are three tips we have to mention. First, the steel cutting wire should be inserted from the side of the flex cables.

  • Second, you should pull the steel wire with even force. If the left side doesn’t work while you pull the wire, you can change other directions, like right or middle side of the screen.

  • Third, if you encounter the residual glue while pulling the steel wire, you can scrape it and then move on.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.