Ga door naar hoofdinhoud
Engels
Nederlands

Stap 1 vertalen

Stap 1
Heat up the screen on the heating platform. Here please be noted that the temperature of the heated platform should be at 90℃. The first one we to do is apply the specialized glue remover XII to the gap between the bezel and the OLED. Then we scrape the cold glue in the bottom of the bezel’s flex cable position with a plastic slice.
Screen Heating
  • Heat up the screen on the heating platform. Here please be noted that the temperature of the heated platform should be at 90℃.

  • The first one we to do is apply the specialized glue remover XII to the gap between the bezel and the OLED.

  • Then we scrape the cold glue in the bottom of the bezel’s flex cable position with a plastic slice.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.