Ga door naar hoofdinhoud

Slider of toaster does not stay down - Repair

Stap 6
Schieber bleibt nicht unten - Reparatur: stap 0, afbeelding 1 van 1
  • Setze ein Kunstoffwerkzeug in die Naht zwischen Ober- und Unterteil ein und vergrößere ringsum den Spalt.

  • Ziehe das Oberteil vom Unterteil ab, Achte dabei auf die Achsen des Reglers und den Schieber.

  • Dazu ist eventuell etwas Kraft nötig.

  • Hebe das Oberteil ab und lege es zur Seite.

Insert a plastic tool into the seam between the upper and lower part and enlarge the gap all around.

Pull the top off the bottom, paying attention to the axes of the controller and the slider.

This may require some force.

Lift the top off and put it aside.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.