Ga door naar hoofdinhoud
Engels
Nederlands
Stap 5
The remaining components are held together with clips and light adhesive. Work carefully, stay organized, and don't tug on anything too hard. Pry up and remove the plastic cap from the bottom of the battery/board assembly. Pry up and remove the plastic cap from the bottom of the battery/board assembly.
  • The remaining components are held together with clips and light adhesive. Work carefully, stay organized, and don't tug on anything too hard.

  • Pry up and remove the plastic cap from the bottom of the battery/board assembly.

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.